Extended cab sub box

az250r · 01-12-2006, 01:36 PM

another option for extended cab subs, 2 10's. Rear seat work was taken out. all the metal shelfs or whatever you want to call it. Bottom of the box was glassed, sorry no pics of it but it needs carpeted so i can snap some then.

working on another box like this one but slightly smaller to work better with my dog deck. so this one will be up for sale shortly.

mrbigbri · 01-12-2006, 01:53 PM

I think it looks like ass.

Brian

Kamr0n · 01-12-2006, 02:19 PM

Quote:

Originally Posted by mrbigbri

I think it looks like ass.

Brian

i just hope it's not finished. at the least.

az250r · 01-12-2006, 02:31 PM

the part where it says "it needs carpeted" would tell you its not finished so if it was carpeted you wouldn't see the fiberglass making it look like ass...

Tacos4life · 01-12-2006, 03:19 PM

looks like you would have way too much air space for those little 10's.

az250r · 01-12-2006, 04:52 PM

not at all, actually just enough, keep in mind the hump that is there for the driveline. that was fiberglassed here's another pic to give an idea.

SurfingDrunk · 01-12-2006, 06:14 PM

looks good.
carpet it.

jessevic · 01-12-2006, 06:46 PM

http://www.tacomaterritory.com/forum...ad.php?t=24316

Theres my single 10" sub box. Just another option.

Point45 · 01-12-2006, 07:17 PM

do you still have the metal for the old stock seats?

fourstringfletch · 01-12-2006, 07:17 PM

here's my 10" box.

it's velcroed to the deck and has quick disconnects so I can throw it in the back if I need the seat.

it's also low enough that it doesn't block the speaker under the window and still allows my seat to lean almost all the way back.

NorcalPR · 01-12-2006, 10:31 PM

Jesse, I did the same thing. I stuffed my 10" solor baric in there. I hammered down the floorboard a bit to get more airspace, and I also cut out the metal to be square instead of the corners cut.

-Phill

az250r · 01-13-2006, 01:02 AM

yeah but i'm keeping them incase i want rear seats again

firemandave · 01-13-2006, 01:26 AM

here's just an idea

0stepside3 · 01-13-2006, 02:36 AM

That box will look good once you get it carpeted. If it were me doing it, I would've made the box to where the subs are firing down into the floor. It, in my opinion, sounds better like that. I will be making my own box for two 12s one day, so I have a question, How did you remove the storage areas in the floor? do you have to cut them out, or are they just screwed in underneath the carpet? Thanks
-Mike

jessevic · 01-13-2006, 07:32 PM

Quote:

Jesse, I did the same thing. I stuffed my 10" solor baric in there. I hammered down the floorboard a bit to get more airspace, and I also cut out the metal to be square instead of the corners cut.

-Phill

Ya I think I read a post about you doing that. I was going to do that, but when I measured the airspace inside the fiberglass, I had just enough cubicfootage. I went with a smaller enclosure size sub as well. Thanks though!
Jesse

Mike: Both sides in an extended cab are screwed down. You dont have to cut anything to pull out 1, or both sides.

0stepside3 · 01-13-2006, 10:05 PM

Quote:

Originally Posted by jessevic

Mike: Both sides in an extended cab are screwed down. You dont have to cut anything to pull out 1, or both sides.

Good deal, thanks for the info. Just gotta get up the money and materials... may just do one side for now since I have only one sub, the other is another $150 I can't swing right now. Thanks again Jesse.

Mike

There4Toy02 · 01-14-2006, 09:06 AM

No pic of my truck available but this is what i've got. it sounds great and looks good while allowing the use of the storage boxes and seats. http://mobile.jlaudio.com/products_s...hp?fit_id=1424

01-12-2006, 01:36 PM	#1
az250r Senior Member My Rig: 03 Taco Join Date: Dec 2004 Location: Phoenix Posts: 479	Extended cab sub box another option for extended cab subs, 2 10's. Rear seat work was taken out. all the metal shelfs or whatever you want to call it. Bottom of the box was glassed, sorry no pics of it but it needs carpeted so i can snap some then. working on another box like this one but slightly smaller to work better with my dog deck. so this one will be up for sale shortly.

01-12-2006, 01:53 PM	#2
mrbigbri Veteran Member Join Date: Dec 2004 Location: Corona, CA Posts: 634	I think it looks like ass. Brian __________________ 1997 Toyota Tacoma 4x4 Supercharged 3.4

01-12-2006, 03:19 PM	#5
Tacos4life Member Join Date: Oct 2005 Posts: 73	looks like you would have way too much air space for those little 10's. __________________ I dont hate jeeps...I just feel bad for them. 97 ext. cab, OME 882/n91s, Custom "6 pack"

01-12-2006, 06:14 PM	#7
SurfingDrunk L'enfer, c'est les autres Join Date: Dec 2004 Location: Tucson, Biatches! Posts: 3,091	looks good. carpet it. __________________ FUCK SURFINGDRUNK "There is nothing good or bad but thinking makes it so". Bill Shakes I love to buy my parts from Toyota of Dallas! Fallen in the line of duty: '93 Toyota, '00 Tacoma, '97 4Runner

01-12-2006, 06:46 PM	#8
jessevic Veteran Member Join Date: Jan 2005 Location: BC Canada Posts: 1,336	http://www.tacomaterritory.com/forum...ad.php?t=24316 Theres my single 10" sub box. Just another option. __________________ Current 2004 V6 Extended Cab Auto Sold and Missed 2008 V6 Extended Cab 6-SPD 2003 V6 Extended Cab 5-SPD Custom stereo and hidden 10" sub Last edited by jessevic; 01-12-2006 at 07:48 PM.

01-12-2006, 02:31 PM	#4
az250r Senior Member My Rig: 03 Taco Join Date: Dec 2004 Location: Phoenix Posts: 479	the part where it says "it needs carpeted" would tell you its not finished so if it was carpeted you wouldn't see the fiberglass making it look like ass...

01-12-2006, 04:52 PM	#6
az250r Senior Member My Rig: 03 Taco Join Date: Dec 2004 Location: Phoenix Posts: 479	not at all, actually just enough, keep in mind the hump that is there for the driveline. that was fiberglassed here's another pic to give an idea.

01-12-2006, 07:17 PM	#9
Point45 Senior Member Join Date: Dec 2004 Location: norcal Posts: 117	do you still have the metal for the old stock seats?

01-12-2006, 07:17 PM	#10
fourstringfletch Senior Member Join Date: Jan 2005 Location: Telluride CO Posts: 125	my idea here's my 10" box. it's velcroed to the deck and has quick disconnects so I can throw it in the back if I need the seat. it's also low enough that it doesn't block the speaker under the window and still allows my seat to lean almost all the way back.

01-12-2006, 10:31 PM	#11
NorcalPR NorCal Chapter Pres My Rig: SAS'd 01 Tacoma Join Date: Apr 2005 Location: In Cali Posts: 11,347	Jesse, I did the same thing. I stuffed my 10" solor baric in there. I hammered down the floorboard a bit to get more airspace, and I also cut out the metal to be square instead of the corners cut. -Phill __________________ Hi, my name is Phill, above are things I say W6FTW Do you live in NorCal? Have you checked out the NorCal Section located here? If not check in today!

01-13-2006, 01:02 AM	#12
az250r Senior Member My Rig: 03 Taco Join Date: Dec 2004 Location: Phoenix Posts: 479	yeah but i'm keeping them incase i want rear seats again

01-13-2006, 01:26 AM	#13
firemandave Veteran Member Join Date: Nov 2005 Location: NorCal Posts: 725	here's just an idea __________________ 1998 Tacoma 4x4 limited Trd "Welcome to Thunder Dome B$^&h" http://s23.photobucket.com/albums/b3...anDave/Tacoma/ Myspace Sold my toy and went to the dark side for a '11 gmc sierra with 6.2 liter and 6" lift. Miss it every day Aviation Ordnance/United States Marine Corps

01-13-2006, 02:36 AM	#14
0stepside3 Veteran Member Join Date: Dec 2005 Location: Dublin, Ga Posts: 606	That box will look good once you get it carpeted. If it were me doing it, I would've made the box to where the subs are firing down into the floor. It, in my opinion, sounds better like that. I will be making my own box for two 12s one day, so I have a question, How did you remove the storage areas in the floor? do you have to cut them out, or are they just screwed in underneath the carpet? Thanks -Mike

01-14-2006, 09:06 AM	#17
There4Toy02 Senior Member Join Date: Mar 2005 Location: New Jersey Posts: 178	No pic of my truck available but this is what i've got. it sounds great and looks good while allowing the use of the storage boxes and seats. http://mobile.jlaudio.com/products_s...hp?fit_id=1424

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
regular cab sub box?	ThePinkTaco	Interior/Electrical/Electronics	12	07-27-2009 01:17 AM
custom sub box Ext. Cab new design!!	jeremiahtrd	Parts/Electronics/Wheels & Tires For Sale	6	12-17-2005 03:01 AM
Double Cab tool box (deflactashield)	nhlbill	Parts/Electronics/Wheels & Tires For Sale	6	08-04-2005 01:37 PM
FS: Ext. Cab fiberglass 8" sub box	Andrew123654	Parts/Electronics/Wheels & Tires For Sale	7	03-07-2005 06:34 PM